Filter cartridges - Filters and filter bags for extractors

Filter cartridges in extractors for aluminum, composites, plastics. The best dust filtration system available. Filter cartridges - Filters and filter bags for extractors - The product at the highest level. With an efficiency of up to 99.5% with very fine dust, they are the ideal and immediate solution to keep the...

Extraction devices for shavings and sawdust

We offer effective extraction of sawdust chips for machines for wood, plastic and metal processing (steel, aluminum). Efficient extraction of sawdust, dust and shavings supported by chip extraction systems. Innovative automation solutions supported by professional service. Professional Extraction Systems -...

CR70 hydraulic bending machine for metal and plastic profiles

High performance hydraulic bending machine for metal and plastic profiles. Machine body in cast iron, gears in hardened steel and three ground tempered steel driving shafts, mounted on conical bearings and controlled by a gearmotor. The machine can be equipped with different control solutions, to allow the best...

EXTRUSION CUSTOM INDUSTRIAL VACUUM CLEANER FOR METAL AND PVC CHIPS

Custom industrial extractors for ALU and PVC chips iV-Custom-Extrusion. iV-Custom-Extrusion industrial extraction line for specific needs of ALU and PVC. Over many years of working with chip, dust and sawdust extraction, iVision has developed numerous solutions, such as 1000-liter tanks, a rotary valve with...

EMULSIO LINE Industrial Vacuum Cleaners for collecting and separation of Chips and Oil

The industrial vacuum cleaners of the EMULSIO line have been developed for the industrial mechanics sector where the specific need consists in the suction of liquids mixed with chips and in the reuse of emulsified liquids generated during the processing of milling machines, lathes and CNC machining centres. The...

EXTRUSION LINE iVision Vacuum cleaner | Hi-tech industrial vacuum cleaners

The line of extractors for effective extraction of ALUminium and PVC chips was created thanks to the experience gained in the industrial mechanics sector. As part of the search for answers to the growing demand of users of ALUminium and composites processing machines in the field of effective extraction of chips and...

CNC cutting and machining center Zeus 8.0 ALU - STEEL

5-axis machining center for aluminum and steel - Zeus 8.0 CNC. It is possible to construct a machining center with a length of 15,000 mm. working field. The 5-axis CNC machining center for aluminum is equipped with a head for angular cutting with a saw blade with a diameter of Ø 500 mm.

OCTOPUS TFF – CNC for cutting, drilling and tapping

OCTOPUS TFF – CNC for cutting, drilling and tapping Maximal flexibility. Compact and safe. Possibility to fit tiltable multispindle units to perform holes, counterbores and tapping. Manual positioning of the units. Exhauster connection. The machine is composed by 4 units: 1 – Manual bar loading unit...

Machining center for aluminium, steel 5 axes processing

Machining center for aluminium, steel 5 axes processing. Machining centers for medium and heavy industry, suitable for iron, steel and aluminum processing. Electrospindles very powerful both asynchronous and synchronous with a power of 20, 24 and 30 kW.Imposing machining center that allows for stability and firmness...

SINGLE HEAD CUTTING OFF MACHINE BARRACUDA EL

SINGLE HEAD CUTTING OFF MACHINE BARRACUDA 550 Single-head cutting off machine with recessing blade realized for aluminium profiles. It has fixed positions at -20°,-45°,90°,+45°,+20°, but it can also cut at intermediate positions. There are in versions available: ELECTRONICS. OVERALL DIMENSIONS...

5-AXIS CNC MACHINING CENTER ZEUS

Zeus is a machining centre with 5 axes and mobile column ideal for light and heavy industry. Designed for milling, drilling, threading and cutting of large sized aluminium bars, it can also work profiles in iron, light alloys and steel. The 15 KW powered electric spindle in S1 with tools attachment HSK-63F...

CTF 3 AXIS Machining and cutting Centre

CTF - 3 AXIS + 1 is equipped with: Saw unit (Ø 450 mm. diam CUT 90°) Roller conveyor with motorized clamps for loading material Electrospindle 8 Kw in S1 Chip conveyor plate. Software. Unloading roller conveyor. - Milling and tapping unit with fixed spindle 8 kW in S1 HITECO brand - Up ward diam. 450 mm...

ALUMINUM, MACHINING CENTERS, PVC ATENA CNC COMPACT SOLUTION FOR INDUSTRIALIZED COMPANIES

ATENA perfectly sums up all the capabilities that a machining center for the door and window industry should have. This machine is equipped with a rotating table and 4 sturdy clamps for handling steel, aluminum and PVC profiles. Created to meet the needs of the window and door industry, with a work unit of 130 x 130...

Pegaso CNC machining center for aluminum processing in 5 axes

Particularly suitable for light industry and suitable for machining steel, aluminum and alloys. Provided with a wide range of 8, 12 and 16 kW electrospindles, high performance clamps with automatic movement through the carriage or through the quick rearrangement of the loading surface. Available in 4, 7, 9, 11 and...

4 AXES PROCESSING ULISSE WIDE VARIETY OF MATERIAL PROCESSING

ULISSE is the ideal machine for an industrial sector with increasing demands. 4-axis CNC includes a large operating area, the largest available in this sector, with a dimension of 700 x 300 mm. Available in the standard versions of 4, 7 and 9 meters, ULISSE can be extended up to 11 and 13.5 meters in length. In all...

Cutting off machine with automatic raising of the blade ORCA 620

Cutting off machine with automatic raising of the blade Ø 620 mm. TECHNICAL DATA: Single head cutting off machine with automatic raising of the blade. Cutting angles from 20° to 150° and intermediate degrees. Mechanical stop for angles setting +45°/+30°/0°/-30°/-45°. Complete with...

Realizacja: Montaż i uruchomienie piły 1 głowicowej Orca Ø 620 + odbiornik elektroniczny Matic

CONQUEST 255 – 515 – 715 CNC machine closed bridge fixed table

5-axis automatic machining center for aluminum profiles: efficient processing of aluminum and steel profiles thanks to the robust construction of the machine body. Flawless 5-axis curvilinear milling. Precise drilling, threading, cutting, cutting and cutting of the alu / steel / PVC profile fixed in the clamps....

Machining center for milling, drilling and cutting aluminum profiles. PIRANHA feed-out tables

PIRANHA machining center ideal for #milling, drilling, threading, trimming, flow-drill and screwing.

CUTTING OFF MACHINE WITH AUTOMATIC RAISING OF THE BLADE ORCA 600

Single head cutting off machine with automatic raising of the blade. Cutting angles from 20° to 150° and intermediate degrees.Mechanical stop for angles setting +45°/+30°/0°/-30°/-45°.Complete with movable fence sliding for increasing cutting capacity.Vertical pneumatic clamping set...

IRONTURN 4 AXES Powerful ISO30 6,6 kW spindle for drilling and milling iron profiles

IRONTURN 4 AXES Powerful ISO30 6,6 kW spindle for drilling and milling iron profiles. 4 vices to guarantee solidity in processingPossibility of machining profiles longer than the length of the basement. Able to perform Flowdrill machining:Dimensions: 4500 x 1450 x 2000 mm.Weight: 1.200 KgElectric spindle power...

ADE WORKING CENTER FOR THE WINDOW AND DOOR INDUSTRY ALUMINUM, MACHINES FOR SPECIFIC PROCESSES, STEEL 4 AXES PROCESSING

ADE perfectly sums up all the capabilities a machining center for the window and door industry should have. Loading section of 230 x 220 mm, profiles machinable at all angles. Equipped with a 6 Kw electrospindle that allows an unequalled working speed. Studied to work profiles up to 6,7 mt. The loading and unloading...

ARES ALUMINUM, MACHINING CENTERS, PVC THE SIMPLIFIED CNC

In just 6 m2, it produces complex profiles and processes. Side and front processing of profiles. Optional 2-station extra magazine for large cutters. Easy-to-use software to speed up processing. Cabin, tool change, automatic clamps and standard tools already included. Versatile and complete 3-axis CNC. It has a...

DOUBLE HEAD MITER SAWS, ALUMINUM, PVC KALIPSO

SPEED AND BETTER CUTTING QUALITY. KALIPSO is a simple and fast mitre saw machine that guides the operator in the execution of his work thanks to an intuitive control panel ensuring a precise and safe work. The software automatically manages all working modes such as minimum cuts, oversize cuts, step-by-step cuts and...

CNC Routers Aluminum, Machining Centers, PVC, Steel ONIX 3300- 3 AXIS Italmac

ONIX is a machining center with three axes and a mobile machining unit. The machine is made for light milling, drilling and threading of aluminum, light alloy and steel profiles. The machine is the most compact and affordable machining center in its class, which enables the machining of profiles up to 6.6 m long....

CNC machining centre with mobile gantry ZEUS 4000

5-axis double zone working CNC machining centre with mobile gantry structure and automatic positioned vices. It is designed for interpolated heavy duty machining operations on the 5 faces of wide aluminium profiles or steel extrudes. The 10 kW electrospindle with HSK 63F tool holder allows performing the various...

Single head cutting off machine with frontal feed of the sawblade ZETA 400M

Radial sliding of the sawing group. Frontal single head electro pneumatic cutting-off machine with hidden blade and manual tilting and feeding. Atomized pneumatic lubrication. Designed to carry out cuts at 90° - 45° right and left, 20° right and intermediate degrees, on aluminium profiles. Equipped with...

BOARD machining centre with 3 axis controlled by the numerical control

The BOARD machining centre with 3 axis controlled by the numerical control, featured by an automatic tool changing device, has been designed to drill and mill steel, aluminium and light alloy plated panels. The machine is available in different sizes to meet the customer’s specific needs and it enables to...

Cutting-off MANTA 550/E

Single head electro pneumatic cutting-off machine with hidden blade, automatic tilting and blade feeding designed to carry out cuts at 20° right and left. Electronic controlled positioning system to carry out intermediate cuts on aluminium profiles at any angle. Equipped with: -  Ø 550 mm. diameter...

ITM 500/600 3-axis double head mitre saw cutting off

ITM 500/600 is our 3-axis double head mitre saw cutting off machine with automatic movement of the mobile head controlled by CNC. ITM 600 Double Head 4000 has motorized head positioning and electronic management of the angles between 22°30’ (external) and 45° (internal). Double mitre saw cutting-off...

4-axis CNC machining center Jade

4-axis CNC machining center with a mobile support, designed for milling, drilling, threading and cutting of bars or elements made of aluminum, PVC, light alloys in general and steel. Main steel structures electrically welded, normalized and CNC machined. Spindle drive managed by precision brushless motors. 6.6 kW...

5 axes machining centre with a mobile column CNC

PEGASO is a light, 5 axes machining centre with a mobile column. Designed for milling, drilling, threading and cutting large size aluminium bars, iron, profiles in light alloys and steel, it is the most used machine in the light industry. The 10 KW powered electric spindle in S1 with tools attachment HSK-63F...

Double head cutting off machine Reverse

Double head cutting off machine with a fixed unit on the left and automatic right head movable by numeric control. Pneumatic tilting of both heads +45°/90°/-45° with mechanical stops for intermediate degrees. Motors 2,2KW (EACH). CUTTING LENGTH 4 MT STANDARD EQUIPMENT     Nr. 2 TCT Saw...

4 AXES PROCESSING MACHINING CENTERS, ALUMINUM, PVC, STEEL

ERMES is an industrial machine designed for multiple production processes, which can accurately respond to different fields. It is a unique, reliable and profitable product, designed to improve the work situation of those who use it. Equipped with 6 automatic clamps and a high power electro-spindle which, thanks to...

Realizacja: Centrum obróbkowe profili z aluminium i stali 4 osiowe ERMES CNC

EM 100 END MILLING MACHINE

End milling machine for end milling applications on aluminum, iron and PVC profiles. Equipped with device for a 45° right and left milling.

M 100 COPY ROUTER ALUMINIUM

Copy router with vertical milling unit. Base in steel, suitable for template or rebate milling operations on aluminum profiles. The M 100 is a copy router for processing aluminum and PVC profiles, with manual head movement and automatic atomized lubrication. Possibility to work both on a template for copying and...

CM 450 Up Miter Saw for Cutting Aluminum

Single head saw machine with automatic underneath blade, able to perform trimming operations. Possibility of trimming. Single head saw machine with automatic underneath blade, able to perform trimming operations. Equipment: vertical pneumatic clamping set, full protection of the blade, trimming fence, air filter,...

CM 550 MITER SAW

Single head radial saw for aluminium profiles. It has fixed positions at -20°, -45°, 90°, +45°, +20°, but it can also cut at intermediate positions. Technical specification: blade diameter 450/550 mm, blade 2800 rpm, air supply 7 bar, pneumatic lubrication, digital display available in the...

M 400 COPY ROUTER

Copy router with vertical milling unit and a 180° rotating floor. Base and work surface in steel. Suitable for template or rebate milling operations on aluminum profiles. Adjustable spindle speed by inverter on the machine. Adjustable rotating table for intermediate degrees.

PWI - milling hard Italmac

PWI is a machine that belongs to the category of CNC with a machining on composite panels, but has the possibility to offer much more according to customer requirements: it offers a management of the working areas in different zones thanks to special valves and a basic pump of 500mq/h that can reach up to 1500mq/h....

Single-head cutting-off machines TM 42 Rinaldi

Elevating single-head cutting-off machine with ample cutting capacity and manual or automatic blade feed in "42A" version. Adjustable vertical squaring up to increase cutting capacity; cutting angle up to 15° to right and left with three fixed positions -45°,0°,+45° for quick positioning....

Vertical panel saw mod. GMC 170 ELECTRONIC SYSTEM

The vertical panel saw mod. GMC 170 ELECTRONIC SYSTEM is the only (vertical) panel saw in the world equipped with an electronic programmer, capable of performing cuts in sequence by executing the order of the inserted work program, with absolute reliability, precision and speed. Possibility to set 90 programs, each...

Manually-operated single-head copy router PAN 38 I

Manually-operated single-head copy router, pneumatic head downward movement locking and side movement by means of indirect lever. Possibility of working steel up to 3 mm with standard fittings; with specific accessory stainless steel up to 2 mm. Spindle rotation speed adjustable with electronic speed variator to...

Vertical Panel Saw KGS / GMC 400 AUTOMATIC

Basic model with useful cut mm. 4200 x mm. 2200 thickness mm. 60 Optimize and customize this GMC Panel Saw with the appropriate configurator, on the right of this tab, by selecting: useful cut, when required, methods and all the accessories you would like to aggregate them according to your specific needs. Once...

Cutting and working lines Shark

Shark is a fully automatic line for cutting profiles. Cutting aluminum - profiles, cut aluminum sections - Anodized clamps for photovoltaics. Modern cutting machines - Reliable CNC machines. A new professional line for cutting aluminum and plastics. Cutting and working lines Shark cutting and working lines....

Single-head cutting-off machine TMA 60A

Elevating single-head cutting-off machine with ample cutting capacity and automatic blade feed. Adjustable vertical squaring up to increase cutting capacity; cutting angle up to 15° to right and left with three fixed positions -45°,0°,+45° for quick positioning. Fully protected work area. Technical...

Roller conveyors and accessories RIS 17V - 40V - 60V

Unloading profile support roller conveyor with reference stop positioning movement, disengageable, manually controlled by handwheel.  Height reading on battery-driven LCD digital display. The "17V" version has a reference working length of 1700 mm, the "40V" version of 4000 mm and the...

Horizontal end-milling machine with manual or automatic feed in 32 A version INT 32 - 32A

Horizontal end-milling machine with manual or automatic feed in "32 A" version INT 32 - 32A. Frezarka pozioma z posuwem ręcznym lub automatycznym w wersji "32 A" INT 32 - 32A. The high tool rotation speed improves work quality on coated profile sections and off size. Performs 90° milling...

TDF 55E Front double-head cutting-off

Front double-head cutting-off machine with NC controlled automatic movement of the mobile head, external and internal head tilting from 22.5 to 135° and all intermediate degrees with electronic numeric control. Hydraulic blade feed with 15° tilting angle. Front casing with shaving collection tray; full...

Saw Blades for PVC and plexiglass

Among the circular sawblades you can find sawblades for panel sizing machines, edge banding and squaring machines, sawblades for woodworking, multipurpose circular sawblades, multirip sawblades with rakers, sawblades with rakers and thin kerf, sawblades for laminated, no noise sawblades for wood, corian, aluminum...

Front single-head cutting-off machine TMF 55

Front single-head cutting-off machine with ample cutting capacity and automatic blade feed. Pneumatically-controlled head tilting with three fixed positions: -45°, 90°, +45°, right and left cutting angles up to 20° with manual positioning; electronic positioning in "50E" version....

MARLIN TFF – CNC for cutting, drilling and tapping alu

Maximal flexibility. Compact and safe. Possibility to fit tiltable multispindle units to perform holes, counterbores and tapping. Manual positioning of the units. Exhauster connection. TECHNICAL DATA Max blade diameter 550 mm. Blade motor three phase 2,2Kw Max profile width 160 mm. Max profile height 210 mm. Max...

Realizacja: Centrum cięcia i wiercenia aluminium MARLIN TFF - CNC do cięcia, wiercenia i gwintowania profili alu

CNC machine closed bridge fixed table CONQUEST 255

CNC machine closed bridge fixed table hard jobs in absolute precision. Conquest 255 is an excellent compromise between price and quality. Designed with a movable bridge and a fixed table, the machine allows to process thick panels with the greatest accuracy, thanks to its closed frame. High speed of all axes...

Industrial Vacuum Cleaner for Chip on CNC Router

The advanced technology and expertise that have characterized the company since its start are what brought iVision to develop a series of Turbine vacuum cleaners dedicated to 3 axis CNC routing machines – vertical or horizontal – which need an efficient and dedicated chip extraction in order to achieve...

Realizacja: Odciągi do pyłów pod rozkrój włókno cementu na piłach pionowych

CONQUEST 515 CNC machine closed bridge fixed table

CNC machine closed bridge fixed table - hard jobs in absolute precision. Conquest 255 is an excellent compromise between price and quality. Designed with a movable bridge and a fixed table, the machine allows to process thick panels with the greatest accuracy, thanks to its closed frame. High speed of all axes...

GAUGE FOR INSIDE/OUTSIDE MEASURING C.LIE

GAUGE FOR INSIDE/OUTSIDE MEASURING C.LIE Modern panel working production technologies have made indispensable the use of appropriate measuring instruments sufficiently precise to achieve high quality standards. The line of gauges m.conti calipers gauges has been designed to meet all woodworking measurement needs...

END-MILLING MACHINE PIRANHA

END-MILLING MACHINE PIRANHA. PIRANHA is a horizontal end-milling machine with manual feeding for working aluminium and PVC profiles. Thanks to its accuracy this machine is particularly suitable for the production of windows and doors. The milling unit movement is made on tempered and rectified round bars. Fixed...

Single head cutting off machine with automatic raising of the blade MANTA 850 E

Single head cutting off machine with blade Ø 850mm, adjustable feed speed of the blade, electronic pivoting readable digital disply. The blade is started by an inverter, which allows the rotation speed to be adjusted, this device allows a better start and stop of the blade. The machine has been created to...

FOX 22S CNC machine closed bridge fixed table

FOX 22S entry-level with high performances. FOX 22S CNC machine closed bridge fixed table. Last new centers CNC, the Fox represents the completion of our full range. It is a machine “entry-level” that offers high performance and a very simple approach to CNC technology. Like all routers made COSMEC...

Realizacja: Frezarka do aluminiowych płyt warstwowych Alucobond centrum obróbkowe profili alu Fox 22S Cosmec

Working Plant for Windows – INDEX

Electronic working plants for windows INDEX. Programmer with 10,4 touch screen colour monitor for the electronic control of machine functione: Vertical stroke for tenoning spindle Stroke of tenoning carriage Vertical stroke 1st profiling spindle Vertical stroke of 2nd profiling spindle Storage of all machine...

ROLLER DIGIT MATERIAL SUPPORT WITH ROLLERS

ROLLER DIGIT MATERIAL SUPPORT WITH ROLLERS. Roller conveyors: ROLLY - MATERIAL SUPPORTS WITH ROLLERS: 3000 /4000 /5000 /6000 mm. ROLLER SPEED - MATERIAL SUPPORT WITH ROLLERS 3000 /4000 /5000 /6000 mm. ROLLER DIGIT MATERIAL SUPPORT WITH ROLLERS 3000 /4000 /5000 /6000 mm. ROLLER MATIK: Outfeeding material support with...

MANUAL COPY ROUTER COPY 3P

MANUAL COPY ROUTER TECHNICAL DATA Manual copy router with pneumatic clamps and lubrication, equipped with tracer points. Equipped with horizontal motorized drilling unit (0,55 Kw – 900rpm) with 3 drilling bits. Lubrication . Working capacities 360x150x140mm. Tool 13200rpm. Three phase motor 0,55KW. STANDARD...

SINGLE HEAD CUTTING OFF MACHINE WITH AUTOMATLC RAISING OF THE BLADE ORCA 500 A

SINGLE HEAD CUTTING OFF MACHINE WITH AUTOMATLC RAISING OF THE BLADE ORCA 500 A TECHNICAL DATA Threephase motor 2,5 HP 1,85 Kw - 3.0 kWDimensions: 820x935x1410 mm. Weight: 280 Kg STANDARD EQUIPMENT: Vertical pneumatic clamping set Full protection of the blade TCT Saw Blade Ø 500mm Air filter Air gun...

Corner crimping machine CRAB 3

Hydropneumatic corner crimping machine suitable to every kind of aluminium profile. Maximum crimping height: 150mm Pressing force 3,5 t (35 kN) STANDARD EQUIPMENT     Frame support arm set     Couple of standard crimping tools 3mm     Couple of standard crimping tools...

NR SERIES CNC machine closed bridge mobile table

Robustness, reliability, precision and speed. This series represents the traditional range of Cosmec machining centres. It consists of routers with a fixed bridge and movable beds, which can be produced in standard dimensions or be customised to suit Customers’ requirements. These machines can be provided with...

CONQUEST 715

CNC machine closed bridge fixed table hard jobs in absolute precision. Conquest 715 is an excellent compromise between price and quality. Designed with a movable bridge and a fixed table, the machine allows to process thick panels with the greatest accuracy, thanks to its closed frame. High speed of all axes...

CNC machine open bridge fixed table CONQUEST 6200

Perfect mix between router and point-to-point. Conquest 3200 represents the perfect combination between a CNC router, with its solidity and accuracy, and a point-to-point machine, as far as speed and flexibility are concerned. One of the main characteristics of this machine is the open frame (cantilever), which...

COSMEC SMART FOR DOORS

Cosmec has just built a new CNC specially made for door's production, infact the CNC SMART has all the features to product perfectly all sort of doors and machining all kind of hardware required in the state of the art today's doors. We can produce and manufacture the following doors: DOORS AND FRAMES...

Floor-type vertical spindle machining center with 5 axis BOLERO 5

BOLERO 5 Floor-type vertical spindle machining center with 5 axis controlled by CNC able to work on extruded aluminium, light alloys, PVC and iron. The machine is fitted with an electric-spindle (15kw., 24.000 rpm) with shank according with HSK63 rule, preset for an automatic tool change. The tool magazine, fixed...

Double head cutting off machine BASIC A-RV 500

Double head cutting off machine BASIC A-RV 500 CUTTING LENGTH 4,6 MT Double head cutting off machine with a fixed unit on the left and automatic right head movable by numeric control. Electronic tilting of both heads +20°/+45°/90°/-45° and all intermediate degrees. Motors 2,2KW (EACH). STANDARD...

Industrial Vacuum Cleaner for Chip on CNC Router FLAT TABLE LINE Industrial vacuums for CNC routers

Industrial Vacuum Cleaner for Chip on CNC Router FLAT TABLE LINE Industrial vacuums for CNC routers. The advanced technology and expertise that have characterized the company since its start are what brought iVision to develop a series of Turbine vacuum cleaners dedicated to 3 axis CNC routing machines –...

Beam panel saws S 2000 – S 2000 T

S 2000 beam panel saws: high performances, solid and accurate mechanics, advanced electronic solutions. Competitive price/quality rate. Beam panel saws S 2000 T are both available for rear direct loading on the lifting table and for side preloading on a roller conveyor, in this case with rollers on the lifting table...

Crimping machines for aluminium frames Vectra

VECTRA 150 Hydropneumatic corner crimping machine suitable to every kind of aluminium profile. Maximum crimping height: 150mm Pressing force 3,5 t (35 kN) STANDARD EQUIPMENT Frame support arm set Couple of standard crimping tools 3mm Couple of standard crimping tools 5mm Couple of standard crimping tools 7mm Foot...

Vertical Machining center CNC MAMBO 5000

Vertical CNC Machining center CNC MAMBO 5000 -  vertical machining center for composite panels in aluminium (A.C.P.) with 3 controlled axis.Slide ways on high precision linear guides, axis movements done with Yashawa Brushless motors and digital drivers. The machine is fitted with one air cooled electro spindle...

Punching machines for composite panel working

Punching machines for composite panel working. Portable-punching-tool-for-hanging-slots-for Alucobond. Oemme Curving Tool. A portable punching tool for the execution of round ended cuts for shaping aluminium composite panels without cracking the panel. The tool has adjustable cutting depth and can be used to process...

Multi-head drilling machines FOR 22D - 23D - 33D

Multi-head drilling machines with fixed left head and the other manually moving, with pneumatic lock. Each automatic-drop head can be selected separately and features 2 spindles with variable centre distance, pneumatic movement of the mobile bit with possibility of storing 2 centre distances and rapid approach...

Up-cut vertical saw GMC / K.G.S. P42

Up-cut vertical saw GMC / K.G.S. P42 4.200 mm cutting length 3-5-7 -fold horizontal and vertical clamping device Automatic work sequence Working length 4.200 m Profile support table 3.0 x 1.3 m Machine dimensions 5.300 x 2.350 x 1600 mm. 400 V, 3~, 3 kW

Copy routers PAN 38L - 38LI

Single-head manually-operated copy router on 3000 mm long base, with manually-moving unit and pneumatic locking. Automatic forward head drop with fast approach device. Quick pneumatic control tool change (optional). Possibility of working steel up to 2 mm with standard fittings; with specific accessory stainless...

Single head cutting off machine PREMIER D-RV 550

Single head cutting off machine with Ø 550mm frontal blade, electronic head’s tilting .Angle from 20° LH to 20° RH, frontal full protection with automatic lowering/upperingdevice, radial movement of the sawing head along with linear guides. Threephasemotor 2 KW. STANDARD EQUIPMENT TCT Saw...

INDUSTRIAL VACUUM CLEANERS FOR METAL & PVC CHIPS iV3 EXTRUSION

iV3 EXTRUSION. iV3 Extrusion Industrial Vacuum Cleaners are the top best-selling models among iVision vacuums and are usually used alongside double-head saws or automatic cutting centers with a high chip production, or generally in all working fields where huge quantities of chips and dust are created. The iV3...

HOT PRESSES FOR POLYURETHANE

Hot press for processing polyurethane. Different versions and sizes are always available on request. TECHNICAL DATA Table sizes: 2500 – 3000 – 3500 mm. Nr. cylinders: from 4 to 10 Diam. cylinders: Ø 70/85 mm. Max thrust: 50-60-70-90-120-160-200 tons Cylinders stroke: from 450 mm to...

THICKNESSING PLANERS with fixed table and moving head

TECHNICAL DATA: Total table dimensions (fixed + entry roller table + exit roller table) TM 810: mm 810 x 3420. TM 1030 mm. 1030 x 3420 Automatic star-delta starter Automatic lifting of the head with screws ball Electronic programmer LCD touch screen for thicknessing head positioning and variable feeding piece...

BEAM PANEL SAWS BPS 95 T

Steton BPS 95 beam saw: high performances, solid, accurate mechanics and advanced electronic solutions. BPS 95 beam saws are available both in versions at front loadfing and the versions “T” at rear loading with lifting table. The electric lifting table is operated through 4 steel screws and bronze...

CNC machine closed bridge fixed table COSMEC TECHNOLOGY FOX 13S

TECHNICAL DATA FOX 13S CNC machine closed bridge fixed table. Entry-level with high performances. Last new centers CNC, the Fox represents the completion of our full range. It is a machine “entry-level” that offers high performance and a very simple approach to CNC technology. Like all routers made...

OUTFEEDING ROLLER MATIK

Outfeeding material support with rollers with electronic positioner, movable length stop. Equipped with electronic positioner able to: • Manage single cuts • Memorizing off cutting list via USB key Length: 3000 / 4000 / 5000 / 6000 mm.

MACHINE FOR PROCESSING ALUMINIUM AND PVC PROFILES

2 CNC controlled axis The machine is composed by 3 units: 1-Manual bar loading unit Gripper to clamp the profile and has provision for manual adjustment: Vertically from 0 to 210 mm Horizontally from 0 to 150 mm Capable of moving a weight of 10 kg per meter Variable feed speed of the pusher from 1 to 24 mt / 1...

Realizacja: Centrum tnąco-obróbcze MARLIN 550 CNC DO CIĘCIA PROFILI Z ALUMINIUM

Machining center CNC - RUMBA 3000

Floor-type vertical spindle machining center controlled by CNC, able to work on extruded aluminium, light alloys, PVC and iron working on 3 sides. Tilting working table managed by CNC: -90°/0°/+90° with intermediate angles. The machine is fitted with an electric-spindle 4Kw, 18000rpm managed by inverter...

CUTMATIC - CNC Machining Center

CUTMATIC Main characteristics of the CNC for cutting, drilling and tapping Easy accessibility. Maximal flexibility. Compact and safe. Fast and reliable with high precision mechanical parts. Translational movements occur with pads sliding on high precision linear guides....

MOULDING MACHINERS DEDRA PLUS 7 H

MOULDING MACHINERS A complete range of moulding machines with 5, 6, 7 spindles with flexible configurations, heavy cast iron basement and the richest standard equipment. Available with spindle bottom horizontal o universal spindle 360° TECHNICAL DATA Max. working width: 240 mm. Min. working width: 20 mm....

M25 Doors CNC MACHINING CENTRE FOR WINDOW DOOR MANUFACTURE

CNC MACHINING CENTRE FOR WINDOW AND DOOR MANUFACTURE M25 Doors  Specifically designed for door manufacture, ranging from 2 head machines incorporating the SAOM twin exit horizontal motor to routers with 2 vertical and 2 horizontal heads up to fully automated units for either doors, frames or complete...

BS 940 RS3” Re-sawing machine

BS 940 RS3” Re-sawing machine. Reinforced re-sawing machine with steel blade tensioning system. Reinforced dual-column base Manual steel blade-tensioning system, with guide lubrication system Standard equipment 400V/3/50 self-braking motor...

AUTOMATIC SINGLE HEAD CUTTING OFF

SINGLE HEAD CUTTING OFF MACHINE MERLIN 550 Single-head cutting off machine with recessing blade realized for aluminium profiles. It has fixed positions at -20°,-45°,90°,+45°,+20°, but it can also cut at intermediate positions. There are three versions available: AUTOMATIC, SEMI-AUTOMATIC...

Crimping machines for aluminium frames

Hydropneumatic corner crimping machine suitable to every kind of aluminium profile. Maximum crimping height: 150mm Pressing force 3,5 t (35 kN) STANDARD EQUIPMENT Frame support arm set Couple of standard crimping tools 3mm Couple of standard crimping tools 5mm Couple of standard crimping tools 7mm...

Realizacja: Zaciskarka do naroży alu z dzieloną głowicą CF 3D

PERFORMANCE PLUS - JAMBS AND DOORS PROCESSING

3/4 AXIS CNC MILLING MACHINE FOR DOORS and WINDOWS ( HORIZONTAL and VERTICAL MOV.) for the execution of looks on doors or housings for counterplates on frames,housings for locks,several kinds of mortises for shutters , slots , staley etc. and in general all the...

AUTOMATIC VERTICAL PANEL SAW PROGRAM M10

The main components of the frame, machined on CNC machine tools allow dimensional accuracy in phase of assembling, therefore an excellent precision while using the machine. Movements on vertical and horizontal axes are secured by hardened and ground linear guides on which slide linear motion guides that allow an...

TENONING POWER

Electronic tenoning machine model POWER. Pc Flex 1000 with 15″ TFT monitor for general control of machine functions, comlete with USB port. Storage of machine data, tools and programs. Control of electronic fence (optional) according to working program with angle display of tenoning carriage and automatic...

DUAL TENONING

Electronic tenoning machine model DUAL. With PC flex 1000 with 15″ TFT monitor for general control of machine functions, complete with USB port. Model THEMA 2 PLUS have a second tenoning shaft 620 mm. Standard: electronic fence and PC Flex 15″ control. TECHNICAL DATA 1st tenoning shaft: useful...

Working Angular Plant INTEGRA

Working Angular Plant INTEGRA. Working plants for windows. Electronic working plants for windows series “INTEGRA”. The angular plants of this series can be composed with a tenoning machine Thema Plus  or 2 Plus and a profiling machine  Single or  Twin . They are suitable for mounting...

THEMA 2 PLUS Electronic tenoning machine

Electronic tenoning machine THEMA 2 PLUS. With Pc Flex 1000 with TFT monitor for general control of machine functions. The carriages are swivelling together with the fence and allow the angled cutting-off and tenoning in the best conditions. At 90º, it is possibile to process two pieces in a single...

TF 2/270 E

TF 2 is an extremely flexible working station, specially studied for the production of windows and several kinds of doors by small and medium sized workshops. On  a single machine the operator can perform cutting-off and tenoning (angled too), profiling, glazing bead profiling and separating, assembled...

Machining center CNC Tango 3

TANGO 3 Floor-type vertical spindle machining center with 5 axis controlled by CNC able to work on extruded aluminium, light alloys, PVC and iron. The machine is fitted with an electric-spindle (15kw., 24.000 rpm) with shank according with HSK63 rule, preset for an automatic tool change. Milling dimensions: X=...

Automatic sawing machine AUTOCUT 500

Automatic sawing machine with automatic feeding for cutting at 90°. Equipped with automatic feeding system fitted with Brushless moter driven by numerical control “touch screen”. Bar-end detection device. Clamping of the bar by “bridge” system. Possibility to load and save cutting...

Realizacja: Automat do cięcia aluminium pod kątem prostym 90º AUTOCUT 500

ULTRA +45 -PROCESSING DOORS AND FRAMES, BEDS AND TAVOL

ULTRA +45 - PROCESSING DOORS AND FRAMES, BEDS AND TAVOL AUTOMATIC DOUBLE MITRE SAWS WITH BORING UNITS HEAD UNITS ROTATION ( +90° - 0 - 45 ) -DOUBLE INCLINATION OF THE BLADES STANDARD EQUIPMENT: Mobile head cutting unit with motorized positioning by gear motor and...

SMART 45 - JAMBS AND DOORS PROCESSING

AUTOMATIC DOUBLE MITRE SAWS WITH BORING UNITS WITH INCLINATION OF THE BLADES machine realized overall for the door frames with coupling joint at 45° STANDARD EQUIPMENT: Mobile head cutting unit with motorized positioning by gear motor and electronic...

EXTRA A-RV-600 Automatic Double Head Cutting Off M/C

Automatic Double Head Cutting Off M/C. CUTTING LENGTH 4MT / 5MT / 6MT High quality double head cutting off machine with a fixed sawing head on the left and one movable on the right side. Automatic positioning of the movable head and automatic tilting of the sawing units. Maximal accuracy by positioning the...

Double head cutting off machine SELECTA 1-3

High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/outwards heads by...

Automatic Double Head Cutting Off MC MASTER

CUTTING LENGTH 4MT / 5MT / 6 MT - EXTRA High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control. Maximal accuracy by positioning the movable sawing head due to LM guides caged balls placed on the frame. Pneumatic tilting of both...

MANUAL SINGLE HEAD COPY ROUTER COPY ECOS

TECHNICAL DATA Manual single head copy router with pneumatic clamps and lubrification, with tracer points. Working capacities 360x140x250mm. Tool at 13200 RPM. Threephase motor 0,55HP (0,55Kw). Overall dimensions: 675x556x1700cm. Weight: 100 Kg. STANDARD EQUIPMENT: Collet D. 8mm Pneumatic clamping...

Single head upstroke mitre saw KAPPA M-RV 600

Single head upstroke mitre saw for compound cuts. Features: 600mm blade, automatic raising /closing of the safety hood, 3kw motor and 2 vertical pneumatic clamps. Manual pivoting inwards/outwards of the head 22,5°-90°-140° with digital angle display, pneumatic tilting of the blade 90°-45° with...

Automatic Single Head Cutting Off M/C PRISMA 450

Automatic Single Head Cutting Off M/C TECHNICAL DATA Single head cutting off machine with automatic raising blade. Threephase motor 2,2 KW.  STANDARD EQUIPMENT Vertical pneumatic clamping set Full protection of the bladeTCT Saw Blade D.450 mmAir filterAir gun   OPTIONALS Digital displayHorizontal...

TEKNODOOR 3001 - JAMBS AND DOORS PROCESSING

TEKNODOOR 3001 PRODUCTION UNITY of: MITRE – BORING – MILLING – ANUBE STANDARD EQUIPMENT: Mobile head cutting unit with motorized positioning ; The sliding mouvement is made on tempered guides and ball recirculation racks...

TANGO 3 - CNC Machining center

Floor-type vertical spindle machining center with 5 axis controlled by CNC able to work on extruded aluminium, light alloys, PVC and iron. The machine is fitted with an electric-spindle (15kw., 24.000 rpm) with shank according with HSK63 rule, preset for an automatic tool change. The tool magazine, fixed on the...

SELECTA 1050 - Double head cutting off machine

High quality double head cutting off machine with a fixed sawing head on the left and automatic right head movable by numeric control with upstroke blades. Rotation and tilting of both blades for compound cuts. Brushless motor for the positioning of the movable head. Automatic pivoting inwards/ outwards heads...

Horizontal end milling machine with automatic feeding LIBRA SA-7N

LIBRA SA-7N Horizontal end milling machine with automatic feeding, milling at 45°/90°/-45°with quick change of the cutter block. Spindle at 7000rpm managed by inverter and potentiometer with frequency read out on display with led. Useful stroke 390mm. Max cutter diameter 200mm. Threephase motor...

SINGLE HEAD CUTTING OFF MACHINE BARRACUDA 550

Single-head cutting off machine with recessing blade realized for aluminium profiles. It has fixed positions at -20°,-45°,90°,+45°,+20°, but it can also cut at intermediate positions. There are three versions available: AUTOMATIC, SEMI-AUTOMATIC AND ELECTRONICS. OVERALL DIMENSIONS...

Glazing bead cutting saw "X" Glazing bead cutting saw "V"

Glazing bead cutting saw "X" Glazing bead cutting saw "V"These cutting machines are realized for the machining of PVC profiles. TECHNICAL DATA:Overall dimensions (LxWxH): 80 x 150 x 135 cm Weigth: 200 Kg. Three-phase motors 230-400V 50 Hz - 1,5 hp (1,1 Kw) Blade speed: 2800 r.p.m. Working...

ORCA 450 SINGLE HEAD CUTTING OFF MACHINE

SINGLE HEAD CUTTING OFF MACHINE WITH AUTOMATIC RAISING OF THE BLADE. POSSIBILITY TO PERFORM TRIMMING OPERATIONS. ORCA 450 A TECHNICAL DATA Threephase motor 2HP. 1,5Kw OVERAL DIMENSION: 800x900x1400 mm WEIGHT: 260KG STANDARD EQUIPMENT: Vertical pneumatic clamping set Full protection of the blade...

Realizacja: 2010 - 2012 - 2014: Piła Astra + Visirol. Legionowo. TCo. Starogard Gdański. Wrocław KFB - Polska.

Vertical panel saws GMC - K.G.S. 42-22

Choice of materials to be processed.: Fiber cement - Saws for the processing of fiber cement. Composite panels of fiber cement. Saws for the processing of fiber cement. Composite panels of fiber cement. Sandwich panels - Insulated - Saws for processing insulated sandwich panels. Corian - Saws for the processing...

Realizacja: 2011 -2015 GMC / K.G.S. 42-22 PILARKO FREZARKA PIONOWA DO ALUCOBONDU UNISŁAW POMORSKI. ADAMEX

RUMBA INOX - CNC Machining center

RUMBA INOX - CNC Machining center Floor-type vertical spindle machining center controlled by CNC, able to work on extruded aluminium, light alloys, PVC and iron working on 3 sides. Tilting working table managed by CNC: -90°/0°/+90° with intermediate angles. The machine is fitted with an electricspindle...

Realizacja: 2010-2011 PHOENIX FREZARKA CNC DO PROFILI STALI CIENKOŚCIENNEJ. PŁOCK

End milling machine PHOBOS 45°

End milling machine PHOBOS 45° Horizontal end milling machine with manual feeding, milling at 45°/90°/-45°. Equipped with spindle at 2800rpm. Max cutter diameter 150mm. Threephase motor 1,5Kw. STANDARD EQUIPMENT Pneumatic clamping set Turret stop for presetting 6 milling depths Pneumatic...

GOTHA Automatic Single Head Cutting Off M/C

TECHNICAL DATA Single head cutting off machine with automatic raising of the blade. Cutting angles from 10° to 170° and intermediate degrees. Mechanical stop for angles setting +45°/0°/-45°. Complete with movable fence sliding on linear guides for increasing cutting capacity. Vertical...

Realizacja: 2013 - 2016. PIŁA PENTA. DOVISTA. SWAROŻYN

STEEL FLEX PLUS - Copy router

STEEL FLEX PLUS Copy router operating on 3 axes equipped with turning table at -90°/-45°/0°/+45°/+90° with 3 pneumatic tracer points for working on 3 sides of the profile.Equipped with Threephase electrospindle with variable speed adjusted by inverter and potentiometer (from 4000 to...

KGS / GMC 400 M

Vertical panel saw KGS / GMC 400 M. Basic model with useful cut mm. X 4200 mm. 2200 mm thick. 60 Optimize and customize this GMC Panel saw with the special configurator, on the right of this tab, selecting: net cut when expected, mode and all the accessories you would like to aggregate them according to your...

Realizacja: 2015. Bystrowice koło Jarosławia: GMC 400 MFP

MAGMA A-RV Notching saws

TECHNICAL DATA Supporting table c/w swivelling fence and sliding on linear guides, vertical sawing unit, saw blade Ø600mm, horizontal sawing unit blade Ø500mm, horizontal sawing unit blade Ø500mm, Equipped with a 4 axis control for automatic adjustment of the horizontal and vertical saw...

Realizacja: Dwugłowicowa Piła do Fasad Alu MAGMA A-RV

COUPY ROUTER COPY SUPER

TECHNICAL DATA Copy router operating on 3 axes, with pneumatic lubrication, 3 pneumatic tracer points. Equipped with turning table at-90°/-45°/0°/+45°/+90°. Quick and easy adjustment of the tracer points. Equipped with variable speed spindle adjusted by inverter and potentiometer (from 2800...

Powerful automatic saw Cutting off machine raising Shark 450

Automatic single head cutting off machine 90° cut with automatic raising up of the blade for mass production, blade’s feeding adjustable, motorized bar feeder with electronic programmer. Cutting operation completely automatic by means of a program managed by PLC, counterpieces function. Carriage sliding on...

BASIC A-RV 500 Auto Double Head Cutting Off M/C

BASIC A-RV 500 Auto Double Head Cutting Off M/C TECHNICAL DATA CUTTING LENGTH 4,8 MT Double head cutting off machine with a fixed unit on the left and automatic right head movable by numeric control. Electronic tilting of both heads +20°/+45°/90°/-45° and all intermediate degrees. Motors...

PREMIER A-RV 550 - Single head cutting off machine

 Single head cutting off machine PREMIER A-RV 550 Single head cutting off machine with Ø 550mm frontal blade, electronic head’s tilting.  Angle from 20° LH to 20° RH, frontal full protection with automatic lowering/uppering device, radial movement of the sawing head along with...

LOGIKA P-RV-550 Automatic Double Head Cutting Off Machine

TECHNICAL DATA CUTTING LENGTH 5MT Double head cutting off machine with a fixed unit on the left and automatic right head movable by numeric control. Pneumatic tilting of both heads +20°/+45°/90°/-45° with mechanical stops for intermediate degrees. Motors 1,8KW (EACH). STANDARD EQUIPMENT...

Tools

Saw blades, cutter head, solid carbide router bits, insert shank cutter. We design and produce tools for wood, aluminum and PVC with custom solutions and integrate engineering, regrinding services for diamond tooling with fast delivery times

INDUSTRIAL VACUUM CLEANERS FOR PROCESSED EXTRUDED MATERIAL

The advanced technology and expertise that have characterized the company since its start are what brought iVision to develop a series of vacuum cleaners with centrifugal fans dedicated to the extrusion working industry. The series is suitable for all machines that cut, drill or mill, producing chips in large quantities that need removal....

CUMBIA - CNC Machining Center

TECHNICAL DATA Floor-type vertical spindle machining center controlled by CNC. Pneumatic tilting working table: -90°/0°/+90°, intermediate angles obtained by mechanical stops. The machine is fitted with an electric-spindle 4Kw, 24000rpm, automatic quick change of the tool with 6 tools positions....

Vertical panel saw TAURUS AV

Vertical panel saw TAURUS AV. Basic model with useful cut mm. X 5000 mm. 2100 mm thick. 50 Description: Robust monobloc structure, the upper guide in hardened and ground steel, electric automatic movable frame, lifting device panels with clamps for horizontal cuts. An electronic cutting machine useful for dissecting...

Saw for cutting aluminum frame profiles V-CUT ABCD

Angle saw for cutting aluminum frame profiles V-CUT ABCD - Aluminum fronts and frames cutting and drilling

4 AXES PROCESSING KRONOS EASY MANAGEMENT OF EVERY ASPECT OF PRODUCTION

Machining center 4 exes processing. Load section of 320 x 230 mm, 8 positions, disc cutters, taps and bevel drives. State-of- the-art 3D program ideal for the window sector. Ø 450 mm. circular blade and 3 kW motor that allows you to cut and end profiles of all kinds. Available in a sound-absorbing cabin...

Realizacja: Obróbka maszynowa profili aluminiowych na Centrum obróbowym Kronos 4.0 CNC